La serie IC-F1000 tiene un delgado 24.5mm de profundidad con carcasa impermeable IP67. El transceptor puede soportar la profundidad de 1 m de profundidad durante 30 minutos. Su construcción hermética al polvo impide la entrada de polvo en polvo, arena, barro y otros objetos.
Con un sensor de movimiento, la serie ICF1000 puede detectar su posición, estado de movimiento y no movimiento y puede enviar una señal de emergencia. La función de movimiento detecta si el transceptor está en movimiento o agitación, por ejemplo, durante una persecución. Las funciones de los trabajadores y el hombre abajo solitarios son programables.
El gran altavoz de 36mm del transceptor proporciona clara compandida 800 mW * de audio. El amplificador incorporado BTL duplica la potencia de salida de audio y de entrega en alta voz e inteligible a un operador de radio que trabajan en ambientes ruidosos. * típico con altavoz interno
El codificador de voz de inversión integrado proporciona conversación segura. Hasta 16 códigos seleccionables.
El paquete suministrado impermeable Li-Ion, BP-279 (7,2 V DC, 1485mAh), dispone de 14 horas * de tiempo de funcionamiento. * Tx: Rx: En espera = 5: 5: 90. Ahorro de energía función ON.
La serie IC-F1000 se ha incorporado en 2 tonos, 5 tonos, CTCSS y DTCS capacidades de señalización para la comunicación de grupo y llamada selectiva ..
Las siguientes funciones del MDC son programables.
Al girar la perilla de canal, la radio anuncia el número de canal.
Conveniente para hacer ajustes de radio sin tener que mirar a la radio.
IC-F1000/S/T |
IC-F2000/S/T |
|||
---|---|---|---|---|
Frequency coverage (Varies according to version) |
USA |
136–174MHz
|
400–470MHz
450–512MHz |
|
EXP |
335–380MHz
400–470MHz 450–520MHz |
|||
Number of channels |
IC-F1000 IC-F2000 |
16 channels
|
||
IC-F1000T/S IC-F2000T/S |
128 channels
|
|||
Type of emission |
16K0F3E*/11K0F3E
|
|||
Channel spacing |
12.5/25kHz
|
|||
Power supply requirement |
7.5V DC nominal
|
|||
Current drain | Tx High |
1.3A
|
||
Rx | Stand-by |
77mA
|
80mA
|
|
Max. audio (Internal SP) |
330mA
|
300mA
|
||
Antenna impedance |
50Ω
|
|||
Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F
|
|||
Dimensions (projections not included; W×H×D) |
52.2×111.8×24.5mm
2.06×4.4×0.96 in (With BP-279) |
|||
Weight (approx.) |
240g
8.47oz (With BP-279) |
IC-F1000/S/T |
IC-F2000/S/T |
||
---|---|---|---|
RF output power |
5W, 2W, 1W
(Hi, L2, L1) |
4W, 2W, 1W
(Hi, L2, L1) |
|
Max. frequency deviation (W/N) |
± 5.0kHz/±2.5kHz
|
||
Spurious emissions |
70dB min.
|
||
Frequency stability |
±2.5ppm
|
||
Audio harmonic distortion (W/N) |
.0%/1.5% typ.
(AF 1kHz 40% deviation) |
||
FM Hum and Noise (W/N) |
46/40dB typ.
|
||
Ext. microphone connector |
3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ
|
IC-F1000/S/T |
IC-F2000/S/T |
||
---|---|---|---|
Sensitivity (at 12dB SINAD) |
0.25μV typ.
|
||
Adjacent channel selectivity (W/N) |
76/53dB typ.
|
73/56dB typ.
|
|
Spurious response rejection |
70dB min.
|
||
Intermodulation rejection |
74dB typ.
|
73dB typ.
|
|
Hum and noise (W/N) |
51/45dB typ.
|
49/43dB typ.
|
|
AF output power (at 5% distortion) |
Internal SP |
800mW typ.(With 12Ω load)
|
|
External SP |
400mW typ.(With 8Ω load)
|
||
Ext. speaker connector |
2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω
|
IC-F1000/S/T IC-F2000/S/T |
||
---|---|---|
Number of option slots |
-
|
|
CTCSS/ DTCS | encoder |
Available
|
decoder |
Available
|
|
2-Tone | encoder |
Available
|
decoder |
Available
|
|
5-Tone | encoder |
Available
|
decoder |
Available
|
|
DTMF autodial |
Available
|
|
DTMF decoder |
-
|
|
Voice Scrambler | Inversion |
Available
|
Non-rolling |
-
|
|
Rolling |
-
|
|
APCO P25 digital |
-
|
|
6.25kHz digital |
-
|
|
MDC 1200 |
Available (Limited functions)
|
|
Motion function |
Available
|
|
Lone worker function |
Available
|
|
Man down function |
Available
|
|
Intrinsically safe |
-
|
|
Voice announcement |
Available
|
|
Audio compander |
Available
|
|
GPS receiver |
-
|
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 G Method, Proc. |
---|---|
Low Pressure Storage |
500.5 I
|
Low Pressure Operation |
500.5 II
|
High Temperature Storage |
501.5 I
|
High Temperature Operation |
501.5 II
|
Low Temperature Storage |
502.5 I
|
Low Temperature Operation |
502.5 II
|
Temperature Shock |
503.5 I-C
|
Solar Radiation |
505.5 I
|
Rain Blowing |
506.5 I
|
Rain Drip |
506.5 III
|
Humidity Induced |
507.5 II
|
Salt Fog |
509.5
|
Dust Blowing |
510.5 I
|
Immersion |
512.5 I
|
Vibration |
514.6 I
|
Shock Functional |
516.6 I
|
Shock Transit Drop |
516.6 IV
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP) | |
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection)
|